Skip to main content

Space Manufacturing

 

Space Manufacturing




Comments

Popular posts from this blog

Gyroid Structure

The below code written in the MATLAB® can be used for generating the Gyroid structure.  %% Program clc; clear all; n1 = 2;  % Number of cells in x Direction n2 = 2;  % Number of cells in y Direction n3 = 2; % Number of cells in z Direction   a=2*n1*pi; % x direction parameters b=2*n2*pi; % y direction parameters g=2*n3*pi;  % z direction parameters   s=0.01;   [x,y,z]=meshgrid(-0.5:s:0.5,-0.5:s:0.5,-0.5:s:0.5);   % Gyroid Formula u = (sin(a.*x).* cos(b.*y) + sin(b.*y).* cos(g.*z) + sin(g.*z).* cos(a.*x));   % Level Set equation c =0.7; Ts= -(u+c).*(u-c);    % Sheet based Gyroid Tsk= u + c;        % Skeletal based Gyroid Isosurface(x,y,z,Ts,0); Isocaps(x,y,z,Ts,0); %% Program Ends If very less knowledge about coding, then the below software can be used for generating Gyroid and other lattice structures. Using Lattice_Karak  helps in designing v...

Role of Microstructure on Hardness

                                            Role of Microstructure on Hardness                                      Key words- Selective laser melting (SLM), 316L Stainless steel (316L SS), Cold spraying (CS), and Cold rolled (CR).   I.     I NTRODUCTION T he Hardness is the measure of a material’s resistance to deformation by surface indentation or by abrasion, some even say it is the quantity that describes strength & heat treatment, some say it is the resistance to permeant deformation but here I will be taking hardness as the resistance to surface indentation.   So here I will be discussing various ways to increase hardness by changing the microstructure of the material, which can be sai...

Preparation of Bioink

  The below report gives detailed information on the preparation of Bioink. press the below link to access it Click here https://docs.google.com/document/d/1tRARvLOMNCCgVrJRtgExFnajDo-ZFRaM/edit?usp=sharing&ouid=116321863313590654612&rtpof=true&sd=true Image source:  Gopinathan J, Noh I. Recent trends in bioinks for 3D printing. Biomater Res. 2018 Apr 6;22:11. doi: 10.1186/s40824-018-0122-1. PMID: 29636985; PMCID: PMC5889544.   Biofabrication lab @IITH